Features

    • Highly flexible, suitable for smaller diameter pulleys
    • High power transmission than standard Belts
    • High tensile strength
    • Excellent performance under variable load conditions
    • Temperature range: -18°C to +80°C

     


Constructional Details

  1. Wear-resistant bias-cut neoprene rubberised polyester cotton fabric
  2. High tenacity, low stretch, specially treated polyester cords.
  3. Especially compounded high modulus compression rubber

Product Range

Section Top Width(mm) Thickness(mm) Angle (Degree) Manufacturing Range Length Desg.
Min. (inch/mm) Max. (inch/mm)
AG-B(17x11) 17.0
11.0
40.0 16.0" 926.0" Li
AG-C(22x14) 22.0
14.0
40.0 31.0" 927.0" Li
AG-25x13 25.0
13.0
30.0 42.5" 254.0" Li
AG-32x15 32.0
15.0
30.0 44.5" 322.0" Li
AG-38x18 38.0
18.0
30.0 56.0" 358.0" Li
AG-45x20 45.0
20.0
30.0 60.0" 259.0" Li
AG-51x22 51.0
22.0
30.0 71.0" 374.0" Li
AG-13x11 13.0
11.0
40.0 42.0" 81.0" Li
AG-15x9 15.0
9.0
40.0 22.5" 254.0" Li
AG-19x11 19.0
11.0
40.0 41.6" 155.0" Li
AG-21x9 21.0
9.0
40.0 39.0" 76.0" Li
AG-22x11 22.0
11.0
40.0 42.0" 354.0" Li
AG-22x16 22.0
16.0
40.0 68.0" 258.0" Li
AG-30x12 30.0
12.0
30.0 64.0" 260.0" Li
AG-33x22 33.0
22.0
30.0 154.0" 900.0" Li
AG-38x23 38.0
23.0
26.0 93.0" 353.0" Li
AG-40x20 40.0
20.0
30.0 68.0" 259.0" Li
AG-55x22 55.0
22.0
30.0
72.0" 259.0" Li
AG-60x25 60.0
25.0
30.0
73.0" 259.0" Li
AG-68x24 68.0
24.0
32.0
96.0" 356.0" Li

Cross Section Top width (mm) Thickness (mm) Angle (Degree) Manufacturing Range
Min. (inch/mm) Max. (inch/mm)
AG-HI 25.0 13.0 30 42.5 / 1080 252 / 6401
AG-HJ 32.0 15.0 30 43.7 / 1110 322 / 8179
AG-HK 38.0 18.0 30 56 / 1422 358 / 9093
AG-HL 45.0 20.0 30 60 / 1524 60 / 1524
AG-HK 38.0 18.0 30 56 / 1422 358 / 9093
AG-HM 51.0 22.0 30 71 / 1803 374 / 9500

Note

Aramid cord construction Belts are available upon request


Reference Standards

ISO 3410:1989 / BS 3733:1974, ASAE 211-3 & 4


Product Label


PIXTRANS