Features

    • Special CR treated outer jacketing fabric for higher durability
    • Anti-static, oil & heat resistant
    • Maximum Belt linear speed (Classical section: up to 30 m/sec, Wedge section: up to 42 m/sec, Narrow section: up to 45 m/sec)
    • Temperature range: -18°C to +80°C
    • ATEX certified FRAS Belts are also available

Constructional Details

  1. Wear-resistant bias-cut neoprene rubberised polyester cotton fabric
  2. High tensile cord embedding cushion rubber compound
  3. High tenacity, low stretch, specially treated polyester cords
  4. Especially compounded high modulus compression rubber

Product Range

Section Top Width (mm) Thickness (mm) Angle (Degree) Min. Pulley Dia. (mm) Manufacturing Range Belt Length Factor (mm) Length Desg.
Min. (inch / mm) Max. (inch / mm) Lp to La Li to Lp Li to La
Classical Section
8 8.0 5.0 40 40 39" 171" 12
19
31
Li
Z 10.0 6.0 40
50
16" 172" 16
22
38
Li
A 13.0 8.0 40
71
16" 357" 14
36
50
Li
B 17.0 11.0 40
112 16" 926" 26
43
69
Li
20 20.0 13.0 40
160 16" 927" 31
48
79
Li
C 22.0 14.0 40 180 31.5" 927" 32
56
88
Li
25 25.0 16.0 40 250 31" 361" 39
61
100
Li
D
32.0 19.0 40 355 44.5" 928" 40
79
119
Li
E 38.0 23.0 40
500 90" 930" 53
92
145
Li
Wedge Section
SPZ 10.0 8.0 40 63 479mm 4000mm 13
37
50
Lp
SPA 13.0 10.0
40 90
576mm 9113mm 18
45
63
Lp
SPB 17.0 14.0
40 140 1000mm 23580mm 28
60
88
Lp
19 19.0 15.0 40 180
2253mm 9137mm 25
69
94
Lp
SPC 22.0 18.0
40 224 1861mm 23654mm 30
83
113
Lp
Narrow Section
3V 9.7 8.0 40 63 19.5" 160" 13
37
50
La
5V 15.8 14.0
40 140
48" 929" 25
60
85
La
8V 25.4 23.0
40 335 101" 934" 53
92
145
La
Light Duty Single V-Belts
3L 9.65
5.59
40
45
17" 173.5" 16
22
38
La
4L 12.7
7.87
40 65
18" 359" 14
36
50
La
5L 16.7
9.65
40 91
21" 199" 26
43
69
La

PIX-X'set® Classical Belts

    • Top width to height ratio 1.6:1
    • Maximum recommended Belt speed is 30 m/s
    • Permissible flex rate f=80 per second

    They are primarily used in industrial drives. Classical Belts are recommended in special applications such as V-flat drives. These Belts are advantageous where reverse idlers have to be used, because of the smaller thickness.

PIX-X'set® Wedge section Belts

    • Top width to height ratio: 1.2:1
    • Maximum recommended Belt speed: 42 m/s
    • Permissible flex rate f=100 per second

    Commonly used because of the space savings achieved by using these Belts. They are used extensively in most of the industrial applications ranging from a light-duty application drive to heavy load applications such as crusher drives. 

PIX-X'set® Narrow section Belts

    • Maximum recommended Belt speed is 45 m/s*
    • The Maximum flex rate is f=100 per second
    • For Belt speed more than 45 m/sec,
      pulleys must be dynamically balanced

    These are the standard section Belts used in USA and Canada, therefore they are primarily used in the machines exported to or from these countries. 8V section Belts are used in heavy-duty applications, for example, stone crushers. 


Note

  • Intermediate sizes are available upon request
  • Aramid cord construction Belts are available upon request

Reference Standard

  • IS 2494, BS 3790, ISO 4184, DIN 2215-1975, RMA IP-22, RMA IP-23, DIN 7753

Applications

Industrial drives, generators, blowers, ball-mills, rolling mills, crushers, compressors, pumps, wet grinders, household appliances, cement


Product Label


Related Products

PIX-X'tra®
Raw Edge Cogged Belts, Classical, Narrow, Wedge Section Belts

PIXTRANS