PIX-WhiteKnight®-XV Cinture per motoslitte

PIX-Whiteknight® is a high-performance Belt, with high horsepower transmitting capacity and uses Aramid cord for seamless power transmission.PIX-Whiteknight® is designed to operate at very low ambient temperatures and is therefore very suitable for use in snowmobiles and other applications of low temperatures.
 

HD series

PIX-HD series Belts are designed for low to medium range horsepower snowmobiles drives. The special compound offers high resistance to heat & the aramid cord gives an excellent breaking strength, enhancing the Belt performance.

Sperimenta il prodotto

Il nostro straordinario modello interattivo di cintura 3D consente agli spettatori di vivere un'esperienza pratica con i prodotti consentendo loro di visualizzarli da qualsiasi angolazione o scala con un rendering ricco.

Caratteristiche

  • Specially compounded aramid reinforced compound to withstand excessive load,under extreme operating conditions
  • Wear resistant sidewalls to sustain extreme high loads and RPM
  • Cog profile of the Belt enhances the flexibility and provides longer life
  • Excellent performance, even if, the equipment needs to be clutch-down
  • Reduced slippage at elevated levels of torque
  • Designed to withstand flexing, cycling, resists fatigue and stretch
  • Excellent overall performance even at low temperature of up to -40°C

Dettagli costruttivi

  1. Special fabric layer
  2. Specially treated aramid cords for high tensile strength & minimal elongation
  3. Fiber filled high modulus base compound
  4. Moulded coggs for better flexibility & also protected with crack resistant bottom fabric

Appunti

Intermediate sizes are available upon request

Standard di riferimento

IS 2494, BS 3790, ISO 4184, DIN 2215-1975RMA IP-22, RMA IP-23, DIN 7753


Applicazioni

Snowmobiles


Gamma di prodotti

Section Top width "TW" (mm) Thickness "TH" (mm) Angle"A"(degree) Length Range "L" (mm)
HD-TW TH A L 20 to 40 10 to 25 22 to 40 600 to 2000

Etichetta del prodotto


XDX series

PIX-XDX series Belts are specially designed for high speed and extremely high horse power snowmobile drives.

The construction of the Belt comprising of double-sided deep moulded cog profile offers high level of flexibility and the specially formulated compound, reinforced with
special fibre and elastomer imparts high heat resistance and an extreme level of dimensional stability.

Sperimenta il prodotto

Il nostro straordinario modello interattivo di cintura 3D consente agli spettatori di vivere un'esperienza pratica con i prodotti consentendo loro di visualizzarli da qualsiasi angolazione o scala con un rendering ricco.

Caratteristiche

  • Specially compounded aramid reinforced compound to withstand excessive load,under extreme operating conditions
  • Wear resistant sidewalls to sustain extreme high loads and RPM
  • Cog profile of the Belt enhances the flexibility and provides longer life
  • Excellent performance, even if, the equipment needs to be clutch-down
  • Reduced slippage at elevated levels of torque
  • Designed to withstand flexing, cycling, resists fatigue and stretch
  • Excellent overall performance even at low temperature of up to -40°C

Dettagli costruttivi

  1. High performance moulded cog design at top with crack resistant stretchable fabric for better flexibility & heat dissipation
  2. Specially treated aramid cords for high tensile strength & minimal elongation
  3. Fiber filled high modulus base compound to withstand low temperatures
  4. Moulded coggs for better flexibility & also protected with crack resistant bottom fabric

Appunti

Standard di riferimento

PIX Proprietary


Applicazioni

Snowmobiles


Gamma di prodotti

Section Top width "TW" (mm) Thickness "TH" (mm) Angle"A"(degree) Length Range "L" (mm)
HD-TW TH A L 20 to 40 10 to 25 22 to 40 600 to 2000

Etichetta del prodotto


prodotti correlati