|
Products-Special
Construction Belts-Sections |
|
High Power Belts |
|
In some
critical applications, whenever torque is applied to the
belts, they get deflected in the pulley groove(See fig.1).
Such deflection leads to an uneven distribution of load
across the tension members.
Therefore, it is important for the compression rubber to be
resistant to the lateral force, when entering into the
pulley grooves. We have developed belts with the
characteristics to withstand this lateral force in wrapped
and raw edge constructions which are called PIX X'set®HP
and PIX X'tra®HP as and High Power Belts
respectively.
These high power belts are designed in such a way that a
composite layer with higher modulus across the belt section
and with good flexibility along the belt circumference
provides good support to High Modulus - Low Stretch (HMLS)
tension member and thereby enhancing the power rating of the
belt by 20% to 30% compared to the corresponding section of
a standard V-Belt.
With the High Power Belts, the number of belts in a matched
set of a multiple-belt-drive gets reduced and the belt life
is also improved significantly. The HMLS tension member
minimises the belt stretch, improving the machine-up time. |
 |
|
Armid Cord Belts Belts |
|
Aramid is an
organic polyaramide fibre that is manufactured using complex
chemical processes. It is generally used where the power
transmission requirements are very critical, apart from
space restrictions on the permissible installation and take
up allowances. Aramid is used as tension member because of
its high tensile strength.
Aramid Cord Belts
are recommended where,
•
There are restrictions on the drive width
• The installation & take-up allowances are minimal
• Critical drives
|
 |
|
Material |
Tensile
Strength Ib/in2 |
% Elongation at break |
|
Polyester |
162000 |
14 |
|
Aramid |
400000 |
4 |
|
The drive design calculation associated with this belt is
similar to the standard drive design procedure . We
recommend that customer should get back to us for further
information on this. |
|
|
|
Heat Resistant Belts |
|
Series :
As per requirement
Description : Suitable for drives working in
inflammable atmospheres & at elevated temperatures. |
 |
|
<<Back<<
|
|
Antistatic Oil & Heat
Resistant Belts |
|
Series : As per requirement
Description : Suitable for applications
where because of humidity electrostatic
generation is high and also suitable for
applications under temperatures (600C
- 1000C) and drives where dripping of
oil cannot be prevented. |
 |
|
|
<<Back<< | | |
|
Belts with Kevlar or Aramid Cord |
|
Series :
Classical, Wedge, Narrow, Hexagonal, Dry Cover, Flat &
Harvester
(Vari Speed) Belts & Cut Edge Belts
Description : Suitable for highly specialised
applications under stringent operations, such as drives
where take-up allowance is not provided, continuous duty
drives where re-tensioning is not possible, overloaded
drives having space limitations. |
 |
|
|
<<Back<<
|
|
Dry
Cover Belts |
|
They are
suitable for drives having clutch applications. Lawn Movers,
Chemical industries where contamination is not acceptable.
Basically manufactured in Blue cover.
Can also be
supplied in Green, Brown, Red, Black and White colours.
Available in polyester and Aramid or Kevlar cord
constructions. |
 |
|
|
Double
Cog Belts |
|
This special
construction allows the use of belt on small pulley
diameters to increase flexibility |
 |
|
|
<<Back<< |
|
Double
Poly Belts |
|
These belts
are recommended to be used on applications demanding
clockwise and anti-clockwise rotations. Belts can be used
from both sides.
Suitable for
very small pulley diameters. |
 |
|
|
<<Back<< |
| |
|
Elasticated Belts (PJ & PH) |
|
Specially
designed poly belts for PJ and PH sections for washing
machines. they are with elastic properties which is useful
in many applications. |
 |
|
|
<<Back<< |
|
Heavy
Duty Variable Speed Belts |
|
Specially
designed to withstand high ambient temperature and oily
conditions generally encountered in adjustable speed
applications. |
 |
|
|
<<Back<< |
|
Cut
Edge Vari Speed Belts |
|
They can be
produced with the following dimensions on request.
length Li / equivalent Lp /La : 24-200 inches
Top Width : 5-82 mm,
Thickness : 5-25 mm,
Angle : 220 to 420 |
 |
|
|
<<Back<< |
|
FRAS
Belts (Fire Resistant &
Anti-Static) |
FRAS
V-Belts (Fire Resistant & Anti-Static) Certain
working environments such as coal mines & sensitive
petro chemical installations require V-belts having
fire resistant properties in addition to normal
anti-static properties. PIX FRAS V-Belts are
suitable for such environments. This construction is
thoroughly tested during & after manufacture, to
comply with all aspects of
IS-2494 Part - II & BS-3790. FRAS Belts are also
certified by ATEX.
Range: We can produce our entire range of belts in
FRAS construction.
Confoms to:  II 2GD
c IIB X (Test report no. IB-03-4-934) - ATEX
|
 |
|
|
<<Back<< |
|
EPDM
Belts (Ethylene Propylene
Diene Monomer) |
Features :
Higher heat
resistance, up to 1500C.
Excellent ozone resistance.
Rib Crack
resistance
Wear and Tear
resistance
Low noise
Longer life
Free of halogen
|
 |
|
|
<<Back<< |
|
|
