Double v-belts

Hexagonal or Double V-Belts are recommended for serpentine drives, where power is to be transmitted from both the sides of the Belt.

Double V-Belts are extremely flexible, they are widely used in agricultural machinery. They are meant for the application where sudden directional changes in the Belt travel occur, these changes exerts a unique stress on the structure of the Belt. PIX-Double V-Belts are perfectly designed and remain aligned both laterally and longitudinally, in the pulley groove, while operating.

PIX Hexagonal or Double V-Belts are antistatic and oil resistant.





Features

  • Absolutely flexible
  • Transmits power from both the sides
  • This special construction allows Belt to be used in “Serpentine-drive" system
  • Temperature range: -18°C to +80°C




Product Range :
Section Tw(mm) Th(mm) Angle MPD
(mm)
Min
(inch/mm)
Max
(inch/mm)
AA 13.0 10.0 40 80.0 46 / 1168 254 / 6452
BB 17.0 14.0 40 125.0 40 / 1016 900 / 22860
CC 22.0 17.0 40 224.0 73 / 1854 900 / 22860
25 25.0 22.0 40 280.0 88 / 2235 900 / 22860
DD 32.0 25.0 40 355.0 158 / 4013 900 / 22860

Application

Hexagonal Belts finds application in the drives where several pulleys in the same plane are to be driven in clockwise and anti-clockwise directions, simultaneously. The polyester tension cord placed at the centre of the construction provides extreme flexibility and low stretch properties. Because of specific cord positioning, the Belts are not subjected to any other forces, as in the case of normal V-Belts. These are also used in rice mills. However, off late these Belts are also used in industrial drives.





Shar this link
Back to Top