PIX-X'tra® Moulded Raw Edge Cogged Classical / Wedge / Narrow Section Belts



Features

  • Higher power transmission capacity than Wrapped Belts
  • Suitable for drives using smaller diameter pulleys and high RPM
  • Anti-static, oil & heat resistant
  • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec)
  • Special cog design for enhanced flexibility and heat dissipation rate
  • Temperature range: -25°C to +100°C
  • ATEX certified FRAS Belts are also available






Product Range :
Section Tw (mm) Th (mm) Angle Standard MPD (mm) Min (inch/mm) Max (inch/mm)
Classical Section
ZX 10.0 6.0 36 IS 2494, BS 3790, ISO 4184 40 21.5 / 546 200 / 5080
AX 13.0 8.0 36 IS 2494, BS 3790, ISO 4184 63 21.5 / 546 200 / 5080
BX 17.0 11.0 36 IS 2494, BS 3790, ISO 4184 90 21.5 / 546 200 / 5080
CX 22.0 14.0 36 IS 2494, BS 3790, ISO 4184 140 23.5 / 597 200 / 5080
DX 32.0 19.0 36 IS 2494, BS 3790, ISO 4184 280 40 / 1016 200 / 5080
Wedge Section
XPZ 10.0 8.0 36 BS 3790, ISO 4184 56 550mm 5100mm
XPA 13.0 10.0 36 BS 3790, ISO 4184 71 550mm 5100mm
XPB 17.0 14.0 36 BS 3790, ISO 4184 112 550mm 5100mm
XPC 22.0 18.0 36 BS 3790, ISO 4184 180 600mm 5100mm
Narrow Section
3VX 9.7 8.0 38 RMA IP 22 56 21.5/546 200 / 5080
5VX 15.8 14.0 38 RMA IP 22 112 21.5/546 200 / 5080
8VX 25.4 23.0 38 RMA IP 22 254 90 / 2286 200 / 5080

Application

Compressors, pumps, fans, vacuum pumps, blowers, generators, heat exchanger, industrial drives, etc.

Shar this link
Back to Top