Products-High Pressure compact hydraulic Hoses-Range

X’el XP Compact( Standards : PIX proprietary. Exceeds pressure rating of EN 857 1SC)
Dash DIN Nominal
Hose
ID
(Inches)		 Nominal
Hose
ID
(mm)		 Nominal
Braid
OD
(mm)		 Nominal
Hose
OD
(mm)		 Maximum Working
Pressure		 Minimum Burst
Pressure		 Minimum Bend
Radius		 Nominal Weight/mtr
Kgs/mtr
psi bar psi bar mm
-4 6 1/4 6.4 10.5 12.5 4060 280 16240 1120 50 0.209
-5 8 5/16 7.9 11.5 13.5 3625 250 14500 1000 60 0.215
-6 10 3/8 9.5 13.7 15.7 3260 225 13040 900 75 0.260
-8 12 1/2 12.7 17.0 19.0 2755 190 11020 760 90 0.325
-10 16 5/8 15.9 21.5 23.5 2175 150 8700 600 125 0.405
-12 20 3/4 19.0 25.5 27.5 2175 150 8700 600 150 0.580
-16 25 1 25.4 33.5 35.5 1600 110 6380 440 200 0.830

 

<<Back<<
 

X’el Super XP Compact (Standards: PIX proprietary. Exceeds pressure rating of EN 857 2SC)
Dash DIN Nominal
Hose
ID
(Inches)		 Nominal
Hose
ID
(mm)		 Nominal
Braid
OD
(mm)		 Nominal
Hose
OD
(mm)		 Maximum Working
Pressure		 Minimum Burst
Pressure		 Minimum Bend
Radius		 Nominal Weight/mtr
Kgs/mtr
psi bar psi bar mm
-4 6 1/4 6.4 11.4 13.5 6525 450 26100 1800 50 0.310
-5 8 5/16 7.9 13.0 15.0 6100 420 24400 1680 65 0.360
-6 10 3/8 9.5 15.1 17.1 5500 380 22000 1520 80 0.440
-8 12 1/2 12.7 18.7 20.9 4710 325 18840 1300 90 0.550
-10 16 5/8 15.9 23.0 25.1 4210 290 16840 1160 120 0.600
-12 20 3/4 19.0 27.5 30.0 4060 280 16240 1120 120 1.210
-16 25 1 25.4 33.5 35.5 3050 210 12200 840 150 1.240

Working temperature:  -40°C To +100°C (Continuous)
Intermittent temperature: -40°C to +120°C (10% of total working hours)
For air application (Temp. Max 70°C) & pressure above 17 bar cover must be pin pricked
UHMWPE film coated high abrasion resistant cover can be provided on request (Available for 3/8" to 1"ID Hoses only)
Special MSHA approved flame resistant outer cover can be provided on request.

<<Back<<
 

 

Site Designed & Maintained by PIX Transmissions Limited, India