Alternator Belts

PIX ALTERNATOR BELTS

An alternator Belt drives the engine's alternator. Keeping the car's battery charged is the job of an alternator. Without the alternator Belt the battery would die after a short amount of driving. The spinning is made possible by the Alternator Belt that runs from the pulley on the alternator to the crank-shaft.

The type of the Belt around the alternator depends solely on the make of the vehicle. Older cars are fitted with a Cogged Belt for the alternator, while newer cars use Poly-V Belts as an alternator Belt.





Features

  • Best suited for next-generation high speed engines
  • Engineered and chemically treated modulus & low stretch tensile cords for higher loads without stretch
  • Fibre re-inforced rubber matrix base compound, for better grip and lateral rigidity
  • Excellent resistant to oil and heat, suitable to operate on small pulley diameters
  • Suitable for Heavy Earth Moving Machinery applications
  • Temperature range: -25ºC to +100ºC
  • Conforms to BS AU 150b, SAE J 636, JASO E 107 standards


Product Range
Section Top Width(mm) Thickness(mm) Angle(Deg) Range Min(mm) Range Max(mm) Length Designation
X9.5 / AVX10 10.0 8.0 36 550 5100 La
X12.5 / AVX13 13.0 10.0 36 550 5100 La
X10A 10.5 8.0 36 550 5100 Le
X11A 11.5 8.0 36 550 5100 Le
X13A 13.5 9.0 36 550 5100 Le
X15A 17.0 10.5 36 550 5100 Le
X17A 18.5 11.0 36 550 5100 Le
X20A 21.5 12.5 36 550 5100 Le

Notes :

  • Banded Belts are available upon request
  • Belts are available in high temperature EPDM construction as well
  • Other sections can be made available upon request


Shar this link
Back to Top