PIX-FORCE® Automotive Raw Edge Cogged Belts

automotive cog belts

Features

  • Best suited for next-generation high speed engines
  • Engineered and chemically treated modulus & low stretch tensile cords for higher loads without stretch
  • Fibre re-inforced rubber matrix base compound, for better grip and lateral rigidity
  • Excellent resistant to oil and heat, suitable to operate on small pulley diameters
  • Suitable for Heavy Earth Moving Machinery applications
  • Temperature range: -25ºC to +100ºC
  • Conforms to BS AU 150b, SAE J 636, JASO E 107 standards


Product Range
Raw Edge Cogged Belts
Section Top Width(mm) Thickness(mm) Angle(Deg) Range Min(mm) Range Max(mm) Length Designation
X9.5 / AVX10 10.0 8.0 36 600 5100 La
X12.5 / AVX13 13.0 10.0 36 600 5100 La
X10A 10.5 8.0 40 600 3000 Le
X11A 11.5 8.0 36 600 3000 Le
X13A 13.5 9.0 36 600 3000 Le
X15A 17.0 10.5 36 600 3000 Le
X17A 18.5 11.0 36 600 3000 Le
X20A 21.5 12.5 36 600 3000 Le

Notes

  • Banded Belts are available upon request
  • Belts are available in high temperature EPDM construction as well
  • Other sections can be made available upon request




PIX-Duo®-XV Double Cog Variable Speed Belts


Cog automotive belts

Features

  • Reduced bending stress allows the Belt to transmit maximum power on smaller pulley diameters
  • Cog profile on both the sides provide excellent flexibility, facilitating longer service life
  • Excellent drive performance even at elevated temperatures, the spacing between the cogs facilitates better heat dissipation
  • Tension member placed at the neutral axis of this Belt provides low stretch properties
  • Smooth functioning as a result of transverse rigidity, greater toughness & superior finish
  • Robust construction helps superior power transmission capacity
  • Wear resistant sidewalls to provides the best wedging effect and higher efficiency
  • Equipped to withstand flexing action, resistant to fatigue and reduce slippage, facilitates smooth performance at extremely high varying loads and rpm
  • Superior resistance to oil, heat and are also antistatic
  • Temperature range: -25˚C to +100˚C


Product Range
Section Top Width(mm) Thickness(mm) Angle(Deg) Range Min (inch/mm) Range Max(inch/mm)
- 13.0 to 85.0 10.0 to 30.0 22 to 40 23.5 / 597 200 / 5080

PIX-X'tra®-XV Variable Speed Belts


automotive products

Features

  • Excellent transverse rigidity and flexibility to prevent bucking at minimum diameter settings where Belt stress is more
  • Firm-gripping-action in the contact areas provide positive traction for precise, immediate response
  • Higher power transmission than regular Belts
  • Longer service-life
  • Facilitates smooth running without excessive vibrations
  • Specific Belt-design for maximum longitudinal flexibility
  • Temperature range: -25°C to +100°C


Product Range
Section Top Width(mm) Thickness(mm) Angle(Deg) Pitch Length Min (mm) Pitch Length Max(mm)
22V-A22/1422V 22.0 8.0 22 815.0 1920.0
30V-A22/1922V 30.0 10.0 22 920.0 3015.0
37V-A22/2322V 37.0 11.0 22 1036.0 3018.0
30V-A26/1926V 30.0 11.0 26 922.0 3018.0
46V-A26/2926V 46.0 13.0 26 1370.0 3198.0
51V-A26/3226V 51.0 13.0 26 1445.0 3375.0
40V-A30/2530V 40.0 15.0 30 1293.0 3198.0
51V-A30/3230V 51.0 16.0 30 1450.0 3380.0
70V-A30/4430V 70.0 18.0 30 1455.0 3385.0
64V-A36/4036V 64.0 18.0 36 1455.0 3385.0
70V-A36/4436V 70.0 18.0 36 1455.0 3385.0
76V-A36/4836V 76.0 19.0 36 1458.0 3388.0
Standards: RMA IP 25/1991
HG 16.5 8.0 26 715.0 5100.0
HH 20.4 10.0 26 720.0 5100.0
HI 25.4 12.7 26 727.0 5100.0
HJ 31.8 15.1 26 730.0 5100.0
HK 38.1 17.5 26 737.0 5100.0
HL 44.5 19.8 26 740.0 5100.0
HM 50.8 22.2 26 745.0 5100.0
HN 57.2 23.9 26 750.0 5100.0
HO 63.5 25.4 26

753.0

5100.0
Standards: ISO 3410:1989 (E) / ASAE S211-4
- 6.00 to 85.00 5.00 to 30.00 22 to 40 23.5” / 597mm 200” / 5080mm
XFHP 9.65 5.59 36 600mm 3000mm

XFHP V-Belts are suited for fractional horse power motors installed mainly in domestic appliances. It is a special category of Belts designed specifically for single-belt application with "fractional horsepower" (FHP) ratings. It offers the opportunity to achieve full operating power requirements with reduced energy consumption, a lower horsepower drive or both.

Note

  • Raw Edge Plain and Raw Edge Laminated Belts can be made available upon request.
  • These sizes are indicative & denote minimum & maximum range. For intermediate sizes please contact us at “info@pixtrans.com”.



PIX-Asymmetra® -Asymmetric Belts


Kevlar Cogged Asymmetric Go Kart Belt

Features

  • Best suited for torque converter systems
  • Higher lateral rigidity
  • Greater toughness
  • Longer life
  • Excellent shock absorbing capacity
  • Temperature range: -25˚C to +100˚C


Product Range
Top Width(mm) Thickness(mm) Angle "A"(Deg) Angle "B"(Deg) Mfg. Range Min (mm) Mfg. Range (mm)
16.0 10.0 18 2 680 2240
19.0
10.0 18 2 680 2240

PIX-Force® Automotive Timing Belts


automotive timing belts

Features

  • Trapezoidal tooth design for sections ZA, ZB and curvilinear tooth design for other sections
  • Precisely formed and accurately spaced teeth ensure smooth engagement with pulley grooves
  • Fibre glass tensile cords provide strength, excellent flex life and high resistance to elongation
  • Durable backing protects against environmental pollution and friction wear
  • Tough nylon surface protects the tooth surface
  • Temperature range: -25ºC to +100ºC
  • Conforms to ISO 9010 / JASO E 105


Product Range
Section Pitch(mm) Tooth Height(mm) Belt Thickness(mm) Mfg. Range
ZA 9.525 1.91 4.10 88 ZA, 104 ZA, 111 ZA
ZB 9.525 2.29 4.50 137 ZB
ZH 9.525 3.50 5.50 89 ZH, 97 ZH, 129 ZH, 136 ZH, 138 ZH, 153 ZH
PR 9.525 3.45 5.50 136 PR
PRM 9.525 3.37 5.50 97 PRM, 122 PRM, 123 PRM, 124 PRM, 134PRM
PRP 9.525 3.50 5.50 177 PRP, 185 PRP
YU 8.000 3.02 5.20 101 YU, 106 YU, 107 YU, 109 YU, 115 YU

Note :

Belts are available in high temperature HSN construction as well



Shar this link
Back to Top