|
Products-Automotive
Belts & Allied Products-automotive |
|
PIX POWER
RIBBED BELTS |
|
Features :
● Trapezoid faced ribs on a fibre reinforced matrix of base
gives higher power transmission
● Offers less vibrations, absorb shocks, low stretch &
excellent behaviour under tension.
● They are extremely flexible and capable to work on small
pulley diameters & serpentine drives.
● Oil & heat resistant offering long service life, suitable
for HEMM applications.
● Resistant to wear & tear and facilitate quiet running of
the equipment.
|
|
Specifications :
Conforms to ISO 9981, 9982, RMA IP 26 standards.
Sections Available :
PK/K. All other sections H/PH, J/PJ, L/PL & M/PM are
available on request.
Range : 280 mm to 5080 mm
|
 |
|
<<Back<<
|
|
PIX VARI
POWER |
|
Features :
● Suitable for high speed engines
● Fibre filled compound oriented across the length
provides high stability and minimizes deflection in
cross-section.
● Especially engineered cords for high power
transmission and length stability.
● Moulded coggs for extra flexibility which also ensures
a better heat dissipation.
● Specially cut belt for uniform contact with the
sheaves, available in Aramid/Kevlar cord constructions.
|
|
Type |
Construction |
Thickness
(mm) |
Size (Li)
inches |
 |
|
Variator
Belt
Top Width:
5mm-82mm
Angle : 220-600 |
REC/REP |
5.0 |
23.5-86.0 |
|
REC/REP |
8.0 |
24.0-200.0 |
|
REC/REP |
9.0 |
24.0-200.0 |
|
REC/REP |
10.0 |
24.0-200.0 |
|
REC/REP |
11.0 |
24.0-200.0 |
|
REC/REP |
12.0 |
24.0-200.0 |
|
REC/REP |
13.0 |
27.0-200.0 |
|
REC/REP |
14.0 |
27.0-200.0 |
|
REC/REP |
15.0 |
27.0-200.0 |
|
REC/REP |
16.0 |
27.0-200.0 |
|
REC/REP |
17.0 |
35.0-200.0 |
|
REC/REP |
18.0 |
35.0-200.0 |
|
REC/REP |
19.0 |
35.0-200.0 |
|
REC |
20.0 |
35.0-200.0 |
|
REC |
21-30 |
42.0-200.0 |
|
REC |
20-22 |
42.0-200.0 |
|
REC : Raw
Edge Cogged Belts
REP : Raw Edge Plain Belts |
|
<<Back<< |
|
|
|
PIX POWER EDGE |
|
Features :
● Suitable for ultra modern high speed engines.
● High modulus and low stretchy tensile cords engineered and
treated to carry higher loads without stretching.
● Fibre reinforced rubber matrix of base compound ensures better
grip and lateral rigidity.
● Excellent resistance to oil and heat, suitable to operate on a
smaller pulley diameters.
● Suitable for HEMM (Heavy Earth Moving Machinery) applications.
|
|
Type of Belt |
Section |
Length Range
(minimum) |
Length Range
(maximum) |
 |
Raw Edge Cogged
Belts |
X 9.5/AVX 10 |
600 mm |
5130 mm |
|
X 12.5/AVX 13 |
600 mm |
5143 mm |
Raw Edge Cogged
Banded Belts |
HAVX10 |
600 mm |
5080 mm |
|
HAVX13 |
600 mm |
5080 mm |
|
Specifications
: Conforms to DIN 7753, BS AU 150b, SAE J 636, JASO E 107
Sections Available : AVX10, HAVX10, HAVX13,
17,20,22,25,17A, 20A, 22A, 25A, all other sections can be made
available on request. |
|
<<Back<<
|
|
POWER WRAP |
|
Features :
● High tensile polyester cord enables maximum power
transmissions.
● Oil & heat resistant, capable to work in oily conditions.
● Capable to work on high speed engines.
● Good abrasion resistance and smooth running not affected by
slip.
● Low stretch and maintenance free.
● High power transmission even on small pulley diameters.
|
|
Type of Belt |
Section |
Length Range
(minimum) |
Length Range
(maximum) |
 |
|
Wrap Belts |
9.5/AV10 |
375 mm |
4064 mm |
|
12.5/AV 13 |
588 mm |
9296 mm |
|
Specifications : Conforms to DIN 7753, BS AU 150b, SAE J 636, JASO E 107
standards.
Sections Available :
9.5/12.5, AV10/AV13/A/B/17/19/20.5/C. All other sections are
available on request. |
|
<<Back<<
|
|
SYNCHRONOUS BELTS |
|
Features :
● Modified tooth profile for improved stress distribution.
● Reduced tooth jump due to deeper tooth design
● High efficiency due to positive engagement between belt teeth
and
pulley grooves.
● Reduced operating costs due to increase in efficiency
● Lower noise level
● No re-tensioning required
● Free from maintenance
● Increased power transmission capacity
● No high tension required
Sections :
Classical Synchronous Belts ZA & ZB
|
 |
|
Type of Belt |
Section |
Tooth |
|
Synchronous Belts
Designation 88 ZA 19
means no. of teeth=88
Section : ZA
Belt width : 19 mm |
136 PR 25 HSN |
136 |
|
89 ZH 2S HSN |
89 |
|
129 ZH 31 HSN |
129 |
|
88 ZA 19 |
88 |
|
137 ZB 30 |
137 |
|
111 ZA 20 |
111 |
|
<<Back<< |
|
AIR CONDITIONING
HOSE |
|
Features :
● Made up of R-134a compatible synthetic rubber
● Consists of high tensile steel wire which is capable to
withstand
pressure, vacuum and flexibility
● Cover is made up of weather, Ozone and heat resistant
synthetic rubber
● Used both for discharge and suction applications
Applications :
General air conditioning
Product Features :
Range : 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" & 1-1/8"
Standard : SAE J 2064 : July 1999 & ISO 8066-2
Grade : B (ISO) equivalent to Type-B (SAE)
Group - 2&4 (ISO) equivalent to Class II (SAE)
Pressure : 24 Bar (Maximum), Burst Pressure : 120 Bar
Temperature Range : -400C to 1250C |
 |
|
<<Back<< |
|
